โ NomadNet 1.4.2 released
๐ฌค rns.recipes
top
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ Rnode via bluetooth on a raspberry pi โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
Started by Anonymous ยท 3d ago
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-1
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Anonymous #1 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 3d ago
I am trying to figure out how I would be able to connect my rnode thats probably BLE only
(Heltec V4,3) to my raspi where my local rnsd runs. I did not find any documentation
about it, but could it be that this is nothing that works "out of the box" with pure
rnsd? I am able to connect to it via bluetoothctl, but using something liek rfcomm to
create a serial interface fails. Probably because of it being a BLE only board? How would
I work around this, or is there an intended way to connect the RNode to something like a
pi wirelessly?
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-2
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Mark #2 โ
โ 8dd57a7382268096 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 3d ago
Should work fine out of the box with rnsd , or any other program that uses
RNS. In your RNode interface config, you just have to specify the port as
ble://RNode 9837 or ble://BLE_MAC_ADDRESS . It's all in the manual.
RNode has to be paired in the OS bluetooth settings or bluetoothctl
first, of course.
Also, be sure to use the very latest RNS 1.5.4, I just pushed a release with some
stability fixes for re-connection when the RNode goes out of range, connection drops, and
such.
If this is for a more permanent setup, for example an always-on transport instance or
similar, you might want to consider connecting over WiFi instead of BLE, though. It has
better range and is less susceptible to traffic drops due to interference.
โ 2 โ 0 โค 1
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-3
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Anonymous #3 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 3d ago
I will reconsider the manual, thanks for the reply! I must have skipped past it. But wifi
sounds better anyway!
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-4
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Mark #4 โ
โ 8dd57a7382268096 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 3d ago
Yes, there's example configuration entries for everything, including connecting over WiFi
in the Interfaces section of the manual. Should be pretty straight-forward to get set up.
โ 1 โ 0 โค 1
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-5
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Anonymous #5 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 2d ago
Yes, I managed it easily. Why I missed the example configs is beyond me. I think I mainly
look at the interface page if I look for something. Thanks anyway! Finally was able to
move the node outside :)
If you want you could further mention that for bluetooth it needs to be paired first with
something like bluetoothctl, but not connected with it. Might be confusing for people.
Also in the wifi commands in rnodeconf it was a bit unclear to me what AP and STATION
means. It was unintuitive for me to use station to actually be a client, if that makes
sense. I didnt know the proper wifi terminology. Just some feedback, maybe it helps
people reading it here also :)
โ 1 โ 0 โค 0
โ INFO โ Identify to this node to post. How?
bottom